facebook

  • marine care
  • 85616 SS3
  • 86622 SS3

  • 89950 SS
  • 85412 SS3
  • 93922 SS1
  • 93932 SS1
  • 93900 SS1
  • 94000 SS2
  • 94532 SS
  • 94632 SS
  • 94432 SS
  • 94222 SS
  • 95222 SS3
  • 80922 SS3
  • 81022 SS3
  • 95322 SS3

  • 89732

  • 89739
  • 89722
  • seasafe
  • 80116 SS1
  • 85732 SS1
  • 85700 SS1
  • 89632 SS1
  • 89738 SS
  • 81732 SS
  • 92832 SS
  • 89754 SS

 Distance :     

 

 

Salt Remover

Concentrate

    • Item:
      904964
    • Size:
      64 oz
    • UPC:
      071247992069
    • Case:
      3
    • Label:
  • US

Description

Safely removes salt deposits from fiberglass decks, vinyl, painted surfaces, aluminum, chrome, stainless steel, magnesium, plastic, wood, glass and rubber.

Features

  • Use Salt Remover applicator to remove salt deposits from outboard and inboard engines
  • Biodegradable formula will not remove wax or polish; will not cause streaks
  • Items can be completely immersed to remove salt deposits
  • Leaves a protective, non-slippery PTEF® coating to repel future salt deposits

Directions

TO REMOVE SALT DEPOSITS FROM EXTERIOR MARINE SURFACES
Fill dispenser with concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure blue knob is in the “Mixture” position, then turn black knob to “On” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Remover to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow to air dry.

TO TREAT ITEMS BY IMMERSING
Add approximately 1 fl. oz. (30 ml) of Salt Remover Concentrate per 32 fl. oz. (1 L) of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

TO FLUSH INBOARD AND OUTBOARD ENGINES
Fill dispenser cup with Salt Remover Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure blue knob is in the “Water Only” position, then turn the black knob to “On”. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and the blue knob to “mixture” and verify solution is flowing. Restart engine and allow to run until dispenser cup is clear, and product has been used up. The Salt Remover PTEF® coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Remover in applicator when not in use.

Product Group

9049

Parent UPC

071247992069