50/50 Pre-Diluted Ready-To-Use Antifreeze Coolant
Protects cooling systems from freezing and boil-over without mixing. Ready-to-use formula with rust and corrosion inhibitors designed for all engines.
DESIGNED FOR:
Aluminum, Copper, Engine Components
WORKS AGAINST:
Corrosion
FeaturesProduct InfoDirections
- NO MIXING REQUIRED Pre-diluted formula for convenience
- FREEZE AND BOIL PROTECTION Provides freeze protection down to -34°F (-36°C) and boil protection up to +265°F (+129°C)
- RUST AND CORROSION INHIBITORS Contains additives to protect aluminum, copper, and other engine components
- READY-TO-USE Ideal for topping off systems that are low on coolant
- COMPATIBLE Works with all other ethylene glycol-based antifreeze solutions
- DESIGNED FOR USE ON GASKETS, HOSES, AND PLASTIC COMPONENTS Formulated to be compatible with common engine parts
- BITREX® INCLUDED Contains a bittering agent to deter accidental ingestion
Product details
- Product number
- 30300
- UPC
- 0 71247 30300 1
- Weight
- 9.59 lb
Warning
WARNING: Can expose you to Ethylene glycol, a reproductive toxicant. See www.P65Warnings.ca.gov
Safety Data Sheet
DO NOT REMOVE RADIATOR CAP WHEN ENGINE IS HOT.
1. Inspect the cooling system for worn or damaged parts and replace as needed. Ensure all clamps and connections are securely tightened.
2. Consult the vehicle owner’s manual for system capacity, recommended change intervals, and specific instructions.
3. Close all drain valves and fill the system with STAR BRITE® 50/50 Pre-Diluted Antifreeze Coolant.
4. Do not add water to this product.
5. After filling, replace radiator cap securely and run engine to operating temperature to circulate coolant.
1. Inspect the cooling system for worn or damaged parts and replace as needed. Ensure all clamps and connections are securely tightened.
2. Consult the vehicle owner’s manual for system capacity, recommended change intervals, and specific instructions.
3. Close all drain valves and fill the system with STAR BRITE® 50/50 Pre-Diluted Antifreeze Coolant.
4. Do not add water to this product.
5. After filling, replace radiator cap securely and run engine to operating temperature to circulate coolant.
